The summer solstice is a useful checkpoint in the garden because it arrives when the season starts to change tone.
Spring establishment is mostly behind us. July pressure is coming. The garden is no longer just getting started. It is either building momentum or beginning to show where management has fallen short.
By late June, tomatoes may be setting clusters. Peppers may be flowering and forming early fruit. Cucumbers and squash may already be producing. Melons and pumpkins are starting to run. Sweet corn may be stretching. Beans may be blooming. Berries may be sizing or ripening. Fruit trees may be carrying a crop. Flower beds are trying to hold color. Containers may be drying daily. Lawns are beginning to feel heat, traffic, and inconsistent irrigation.
This is the right time to walk the garden slowly.
Not to panic. Not to throw fertilizer at every yellow leaf. Not to overcorrect because one plant looks tired after a hot afternoon. The purpose of a solstice check is to identify problems while there is still time to make useful corrections before July heat makes everything harder.
July usually reduces the margin for error.
Dry soil gets drier. Wet spots stay weak. Blossom end rot becomes more visible. Potassium demand increases as fruit load builds. Magnesium shortage can show on older leaves. Nitrogen excess creates dense growth that is harder to manage. Containers become less forgiving. Raised beds lose moisture faster. Clay soils crust. Sandy soils leach. Pest and disease pressure often increases in dense canopies. Watering habits that worked in May may no longer be enough.
A good late-June correction is not always a large correction. Sometimes it is a soil check. Sometimes it is a calcium application before fruit quality problems spread. Sometimes it is potassium and magnesium support before heat stress peaks. Sometimes it is adjusting irrigation, pulling mulch back, pruning for airflow, or stopping nitrogen before plants get too soft.
For this summer solstice garden check, three Supply Solutions products fit especially well: Soil Probe And Analysis Kit, Calcium Nitrate 15.5-0-0 + 19% Ca, and KMS 0-0-21.5 Potassium Magnesium Sulfate. The Soil Probe And Analysis Kit helps growers stop guessing and understand what is happening below the surface. Calcium Nitrate supports soluble calcium and nitrate nitrogen during active fruit development. KMS supports potassium, magnesium, and sulfur without adding nitrogen.
Together, they cover three common late-June questions: what is actually in the soil, whether calcium is moving before fruit problems appear, and whether plants have enough potassium and magnesium support before July stress.
The summer solstice is not just a date on the calendar.
It marks a point when many crops are entering a more demanding stage. The days are long. Sun intensity is strong. Warm-season crops are expanding rapidly. The garden is using more water and nutrients than it did a month earlier. The root systems are larger, but the above-ground demand has also grown.
That makes late June a good time to review the garden before stress becomes harder to correct.
In early spring, a slow plant may simply need warmer soil. In late June, a slow plant may be short on nutrients, limited by roots, stressed by moisture swings, or carrying more fruit than it can support. In May, a container may stay moist for two days. In late June, it may dry by midafternoon. In early June, a tomato may look strong from nitrogen-rich soil. By the solstice, that same tomato may need potassium and calcium support rather than another nitrogen push.
The solstice check works because the garden is far enough along to show patterns.
Weak spots are visible. Low areas, dry edges, compacted paths, container problems, nutrient imbalance, and watering mistakes are easier to see. At the same time, there is still time to correct many of them before July heat makes plants less responsive.
A good solstice walk is one of the most valuable jobs a gardener or small grower can do.
Most garden problems show above ground, but many begin below the surface.
A yellow leaf is easy to see. A dry root zone is not always obvious. A pale tomato can be visible from the path, but compacted soil around its roots may be hidden. Blossom end rot appears on fruit, but the interruption often started earlier in the water and calcium pathway. A weak pepper may look underfed, but its roots may be sitting in saturated soil. A cucumber may wilt every afternoon because the raised bed dries too fast below the mulch.
This is why a soil check matters.
The Soil Probe And Analysis Kit fits the solstice check because it helps growers inspect and sample the root zone rather than guessing from the surface. A probe helps reveal whether the soil is dry, wet, compacted, layered, shallow, or inconsistent across the bed. The analysis side helps guide fertility decisions instead of relying only on plant color.
The problem this kit helps solve is guesswork.
By late June, many gardens have received compost, fertilizer, rainfall, irrigation, mulch, and crop removal. The soil that was present at planting is not exactly the same system now. Nutrients may have been used, leached, or built up unevenly. Moisture may differ between bed centers and edges. Containers, raised beds, field rows, and ground-level gardens may all behave differently.
The timing is late June before July corrections are made. It is better to test and probe before applying more fertilizer than to overcorrect and create imbalance.
A soil probe does not replace observation. It makes observation more accurate.
Before deciding what to apply, check water.
This is the first rule of a late-June garden review. Many plants that look hungry are actually struggling with moisture. Dry roots cannot take up nutrients well. Saturated roots cannot breathe. Roots that swing from dry to soaked become inconsistent. A fertilizer application made into poor moisture conditions may perform badly even if the product is correct.
Push into the soil several inches.
Look below the mulch. Check the center of raised beds and the edges. Check containers by weight and by moisture below the surface. Check clay areas that may stay wet underneath even if the surface is crusted. Check sandy soils that may look fine but dry quickly. Check around fruiting plants where demand is highest.
The Soil Probe And Analysis Kit is useful here because the root zone often tells a different story than the surface.
If the soil is dry, water comes before fertilizer. If soil is saturated, drainage and oxygen come before fertilizer. If water runs off, infiltration needs attention. If the bed dries too quickly, mulch, irrigation frequency, and bed depth may need adjustment.
Late June fertilizer decisions should start with the question: can roots use this today?
Blossom end rot is one of the most common problems that becomes visible around this point in the season.
It often shows on tomatoes first, but peppers, squash, cucumbers, melons, and other fruiting crops can also experience calcium-related fruit quality problems. The dark, sunken area at the blossom end of the fruit feels sudden, but the actual interruption usually began before the damage was visible.
That is why the solstice check is important.
If gardeners wait until several fruit are damaged, they are already behind. The damaged fruit will not heal. The goal is to protect future fruit by improving calcium availability, water consistency, and root function.
Calcium Nitrate 15.5-0-0 + 19% Ca fits this late-June window because it supplies soluble calcium along with nitrate nitrogen. The calcium supports fruit tissue development. The nitrate nitrogen supports active growth when the plant still needs it.
The problem Calcium Nitrate helps solve is active calcium demand during fruit set and early fruit sizing. It is useful for tomatoes, peppers, cucumbers, squash, melons, greenhouse crops, raised-bed vegetables, and containers where soluble calcium support is needed.
The timing is before blossom end rot or calcium-related problems become widespread. Late June is often a good review point because many fruiting crops are just beginning to carry enough fruit for calcium demand to matter more.
The caution is nitrogen. Calcium Nitrate contains nitrogen, so it should not be applied blindly to plants that are already overly lush and leafy. Count the nitrogen in the full program. Use it where calcium and measured nitrate nitrogen fit the crop stage.
Calcium support works only when water is steady enough to move it through active roots.
Calcium does not move through the plant like nitrogen.
It depends heavily on water movement. Roots take up calcium with soil water, and the plant moves it through the transpiration stream. Developing fruit may not receive calcium as easily as leaves do, especially when moisture is inconsistent.
This is why a soil can contain calcium and the plant can still show calcium-related fruit problems.
If the root zone dries hard, calcium uptake slows. If the grower floods the plant after a dry spell, uptake may still be uneven. If roots are damaged by saturation, compaction, or heat, calcium movement suffers. If nitrogen pushes excessive leaf growth, leaves may compete strongly for water. If fruit is developing during a moisture swing, damage can start even if fertilizer was applied.
Calcium Nitrate supplies calcium in a useful soluble form, but irrigation management decides how well that calcium reaches developing fruit.
During the solstice check, look for moisture patterns around calcium-sensitive crops.
Are tomato beds drying out between waterings? Are peppers in containers wilting daily? Are raised bed edges dry? Is mulch thin or missing? Are roots waterlogged after storms? Is irrigation shallow? Are plants near pavement hotter and drier than the rest?
Correct those patterns along with the calcium program.
By late June, potassium deserves serious attention.
Potassium supports water regulation, fruit development, plant strength, stress tolerance, and overall function under heat. As fruiting crops carry more fruit and weather becomes hotter, potassium demand increases. A crop may have looked good in early June, then begin losing strength as fruit load rises.
This is especially common in tomatoes, peppers, cucumbers, squash, melons, pumpkins, beans, berries, fruit trees, grapes, and flowering plants.
Potassium shortage may show as marginal yellowing or browning on older leaves, weak stress tolerance, slow fruit sizing, uneven production, or plants that wilt too easily under heat. It may not always look dramatic at first. Often the crop simply loses momentum.
KMS 0-0-21.5 Potassium Magnesium Sulfate fits the solstice check because it supplies potassium, magnesium, and sulfur without nitrogen.
The potassium supports water regulation and fruiting. The magnesium supports chlorophyll and leaf function. The sulfur supports plant metabolism. That combination is especially useful heading into July, when leaves need to keep feeding fruit under stress.
The problem KMS helps solve is potassium, magnesium, and sulfur demand during fruiting and summer stress without encouraging extra nitrogen-driven leaf growth.
The timing is late June before heat stress peaks, especially where soil tests, symptoms, or crop stage suggest these nutrients are needed.
Magnesium is easy to overlook until leaves begin showing stress.
It supports chlorophyll and leaf function. Fruiting crops depend on healthy leaves because leaves produce the sugars that feed fruit. If magnesium is short, older leaves may yellow between veins while veins stay greener. The plant may still have leaves, but those leaves may not work as efficiently.
This matters in late June.
A tomato plant with fruit clusters needs leaves that function. A cucumber vine producing daily needs leaf strength. A melon sizing fruit needs photosynthesis. A berry plant after harvest needs leaves to rebuild reserves. A fruit tree needs leaf area to size fruit and prepare for next season.
KMS fits when potassium and magnesium are both needed. It helps solve more than one June stress point: potassium for water and fruiting, magnesium for leaf function, and sulfur for plant processes.
The caution is to avoid assuming every yellow leaf means magnesium is short. Older leaves can yellow from nitrogen shortage, natural aging, disease, shading, water stress, or root problems. Use soil testing, symptom pattern, and crop history to decide whether KMS fits.
Magnesium support is valuable when the plant’s leaf system is carrying the crop into summer.
Sulfur is another nutrient that becomes more noticeable when plants are growing fast.
It supports protein formation, enzyme activity, and plant metabolism. It also works with nitrogen in supporting growth. In sandy soils, low-organic-matter soils, or areas with heavy rainfall, sulfur can become limiting. In June, fast-growing crops can expose that limitation.
KMS supplies sulfur along with potassium and magnesium, making it useful where sulfur support is part of the need but nitrogen is not.
This is different from using Ammonium Sulfate, which supplies nitrogen and sulfur. KMS fits when the grower wants sulfur support without adding nitrogen. That can be important in fruiting crops that are already green enough but need better stress and leaf support.
The timing is late June when roots are active and crops are moving into higher demand.
Sulfur will not fix every pale plant. But in a balanced solstice review, it should not be ignored, especially in leaching-prone soils and high-demand crops.
Nitrogen is important, but late June is a common time to overuse it.
The garden looks tired, so the grower applies more nitrogen. A tomato has yellow leaves, so more nitrogen goes on. Peppers are slow to fruit, so they get fed harder. Cucumbers slow during heat, so nitrogen is increased. A flower bed fades, so more growth is pushed.
Sometimes nitrogen is needed. Often, it is not the only issue.
Too much nitrogen going into July can create soft, leafy growth. Dense tomato canopies hold humidity and reduce airflow. Pepper plants may grow foliage instead of balancing fruit. Melon vines may run heavily without solving fruit set or potassium demand. Flower beds may get leafy and weak. Lawns may require more mowing and water.
The solstice check should separate nitrogen need from potassium, calcium, magnesium, sulfur, water, and root problems.
Calcium Nitrate does supply nitrogen, so use it where nitrate nitrogen fits the crop. KMS supplies potassium, magnesium, and sulfur without nitrogen, which can be more appropriate when the crop is already green and vigorous. The Soil Probe And Analysis Kit helps determine whether nitrogen is actually part of the shortage or whether another correction is needed.
Do not feed for color alone. Feed for crop function.
Tomatoes are usually one of the first crops to reveal late-June management problems.
They may be growing strongly, flowering, setting green fruit, and beginning to show lower leaf changes. Some lower yellowing can come from age, shading, early disease, water stress, nitrogen shortage, magnesium shortage, or root issues. Blossom end rot may begin appearing on early fruit. Dense growth may reduce airflow. Containers may dry daily.
The solstice tomato check should include moisture, canopy, fruit, and nutrition.
If fruit are forming and calcium support is needed, Calcium Nitrate can fit, especially before blossom end rot becomes widespread. It should be paired with steady water and careful nitrogen awareness.
If tomatoes are green and fruiting but need potassium, magnesium, and sulfur support before heat increases, KMS can fit. It supports fruiting strength and leaf function without pushing more nitrogen.
If the same tomato bed has had problems year after year, the Soil Probe And Analysis Kit is useful for checking soil condition and guiding fertility rather than repeating the same correction.
Tomatoes respond best when calcium, potassium, water, and canopy balance are managed together.
Peppers often move more slowly than tomatoes, but they still need a late-June check.
By the solstice, many pepper plants should be branching, flowering, or beginning fruit set. If they are still small and pale, roots, soil temperature, nitrogen, water, and transplant stress should be reviewed. If they are dark green and leafy but slow to set fruit, more nitrogen may not be the answer. If early fruit are developing, calcium and potassium matter more.
Calcium Nitrate can support peppers where soluble calcium and nitrate nitrogen fit the stage, especially before fruit quality problems appear.
KMS can support potassium, magnesium, and sulfur needs as peppers move toward fruiting and heat stress.
The Soil Probe And Analysis Kit helps determine whether the bed is dry, compacted, saturated, or nutritionally out of balance.
Peppers punish overreaction. They usually respond better to steady moisture, moderate feeding, and balanced support than to heavy fertilizer pushes.
Cucumbers and squash can move fast in late June.
They may already be producing, or they may be entering bloom. Either way, they are high-demand crops. Large leaves pull water quickly. Fruit develops rapidly. Vines can outrun weak fertility. Production can fade quickly if the plant runs short on water, potassium, or root function.
The solstice check should look at vine color, leaf condition, fruit set, pollination, and moisture.
If older leaves are yellowing between veins or edges are burning, potassium or magnesium may be worth reviewing. If the plant wilts every afternoon, check whether it recovers overnight and whether the soil is actually moist below the surface. If fruit are misshapen, pollination and water should be reviewed along with fertility.
KMS fits cucumbers and squash where potassium, magnesium, and sulfur support are needed during production.
Calcium Nitrate can fit where calcium and nitrate nitrogen support are needed, though cucurbit problems should not all be blamed on calcium. Pollination, weather, and water matter heavily.
Use the Soil Probe And Analysis Kit to check moisture and root-zone condition before assuming the plant is simply hungry.
Melons and pumpkins often spend late June building vines and setting the foundation for fruit sizing.
This is the time to make sure they are not being pushed too hard with nitrogen while potassium support is ignored. Strong vines are useful, but excessive vine growth without fruiting balance can delay productivity. Once fruit begins sizing, water and potassium demand become serious.
KMS fits melon and pumpkin plantings where potassium, magnesium, and sulfur are needed before July heat and fruit sizing intensify.
Calcium Nitrate may fit where calcium and nitrate nitrogen are appropriate, but use it carefully if vines are already lush.
The Soil Probe And Analysis Kit can help check whether the root zone is deep, moist, and open enough to support long vines and future fruit.
Melons and pumpkins need room, pollination, water, and balanced nutrition. Late June is the moment to correct the base before fruit load increases.
Raised beds often change quickly after the solstice.
Edges dry first. Shallow beds run out of moisture faster. Compost-heavy mixes may release nutrients quickly but also leach under frequent watering. Plants in the center may look better than plants near the sides. Mulch may hide dry soil. Daily light watering may keep the surface damp while deeper roots remain short on moisture.
Use the Soil Probe And Analysis Kit to check moisture and soil depth in raised beds before applying fertilizer.
If fruiting crops need calcium, Calcium Nitrate can fit, but it must be paired with consistent moisture. A raised bed tomato that dries hard every two days may still show blossom end rot even if calcium is supplied.
If the bed is moving into fruiting and needs potassium, magnesium, and sulfur, KMS can fit, especially where nitrogen should be limited.
Raised beds reward timely correction, but they also punish overfeeding because the root zone is contained.
By late June, containers often become the most demanding part of the garden.
Tomatoes, peppers, citrus, berries, herbs, hanging baskets, patio fruit, and ornamentals in pots may need daily attention. A container can dry out completely while nearby ground soil remains moist. Nutrients can leach with frequent watering. Roots can become hot against the pot wall. A small container may not support the plant’s fruit load.
The solstice check should include pot size, drainage, moisture, and feeding history.
Do not feed a dry container as the first response. Water thoroughly, let the plant recover, then fertilize if needed. Do not feed a saturated container with poor drainage. Empty saucers and make sure water can leave the pot.
Calcium Nitrate can fit container fruiting crops where soluble calcium and nitrate nitrogen are needed, but it should be used carefully because containers are less forgiving.
KMS can fit containers where potassium, magnesium, and sulfur support are needed without nitrogen, but rates and timing must be careful in small root zones.
The Soil Probe And Analysis Kit is more soil-focused, but the same principle applies: know the root zone before feeding.
Gardens often get attention at the solstice, but lawns and turf should be checked as well.
Late June turf may still be green, but root-zone stress may already be developing. Dry spots, compacted paths, pet areas, mower turns, and edges near pavement often show first. Fertilizer response becomes uneven when water and roots are uneven.
The Soil Probe And Analysis Kit can help check soil moisture, compaction, and sampling needs in turf areas.
KMS may fit lawns where potassium, magnesium, and sulfur support are needed without adding nitrogen, especially where summer stress tolerance and leaf function matter. KMS can support potassium for stress tolerance and magnesium for green leaf function when those nutrients are needed.
Calcium Nitrate is not the main lawn product in most home turf programs, but understanding calcium and nitrogen timing still matters in managed turf systems. For most gardeners, the stronger solstice lawn lesson is to check water, compaction, mowing height, and potassium-magnesium status before July heat.
A lawn that looks green at the solstice can still fail if roots are shallow and water movement is poor.
Flower beds often begin fading around the solstice if they were planted early and heavily blooming.
Annuals may be using up greenhouse fertility. Perennials may be finishing their first bloom cycle. Beds near pavement may dry quickly. Hanging baskets may be leaching nutrients daily. Too much nitrogen can push soft foliage, while too little potassium and magnesium can reduce heat resilience and leaf function.
KMS fits flower beds where potassium, magnesium, and sulfur are needed without pushing more nitrogen. KMS can support stress tolerance and leaf function as July heat approaches.
The Soil Probe And Analysis Kit can help identify whether beds are dry below the mulch, compacted, or uneven in moisture.
Calcium Nitrate is less commonly the first choice for general flower beds, but it may fit certain ornamental or production systems where calcium and nitrate nitrogen are appropriate. In most summer color beds, potassium, water, grooming, and balanced ornamental feeding are more central.
Before feeding flower beds, deadhead, trim leggy growth, check moisture, and inspect for pests. Fertilizer works better when the bed is physically managed.
The solstice check should include problems beyond fertility.
Fertilizer cannot fix poor pollination. It cannot make a shaded tomato behave like one in full sun. It cannot correct a pot that is too small. It cannot reverse fruit already damaged by blossom end rot. It cannot cure root rot while the soil stays saturated. It cannot replace irrigation in a dry raised bed. It cannot remove spider mites, aphids, squash bugs, cucumber beetles, or disease pressure.
This matters because late June symptoms can be misleading.
Blossom drop may come from heat, poor pollination, or water stress. Yellow leaves may come from disease, pests, shading, or root damage. Wilting may come from dry soil, saturated soil, vine borer, bacterial wilt, root restriction, or heat. Poor fruit sizing may come from crop load, water stress, potassium shortage, or pollination issues.
Use products where they fit the problem.
Use the Soil Probe And Analysis Kit to reduce guessing. Use Calcium Nitrate where calcium and nitrate nitrogen support are needed. Use KMS where potassium, magnesium, and sulfur support are needed.
Do not use fertilizer to avoid diagnosis.
Late June is valuable because small problems are still easier to correct.
A tomato bed that is beginning to dry too much can be mulched and watered more evenly before blossom end rot spreads. A cucumber vine that is beginning to lose lower leaf function can be checked for potassium, magnesium, water, and disease before production drops. A pepper plant that is starting fruit set can receive calcium and potassium support before heat stress becomes severe. A raised bed that dries at the edges can be adjusted before July. A container that is barely large enough can be moved or managed more carefully before the plant is overloaded.
This is the purpose of the solstice check.
Do not wait for collapse. Look for direction.
Is the garden becoming drier each week? Are plants getting leafier but not more productive? Are fruiting crops beginning to show calcium stress? Are older leaves losing function? Are containers needing water twice a day? Are beds leaching nutrients? Are roots limited? Are weeds competing heavily? Is mulch missing? Are pests building?
Small corrections made now often save larger corrections later.
Walk the garden in the morning first.
Look at plants before the worst heat of the day. Healthy plants should look recovered after the night. If a plant is already wilted in the morning, something more serious may be wrong. Check containers, raised beds, field rows, flower beds, fruiting crops, and lawns separately.
Then walk again in late afternoon.
Notice which plants wilt first. Some afternoon wilting during extreme heat can be temporary, but repeated severe wilting means the root zone or water supply needs attention. Mark the areas that struggle.
Then check the soil.
Use the Soil Probe And Analysis Kit to check moisture, compaction, and sampling needs. Look below mulch. Compare bed centers and edges. Check sandy spots, clay spots, containers, and low areas.
Then check crop stage.
Are tomatoes setting fruit? Are peppers flowering? Are cucumbers producing? Are melons running? Are berries sizing? Are fruit trees carrying a crop? Are flowers still blooming? Is turf under traffic?
Then choose corrections.
Use Calcium Nitrate 15.5-0-0 + 19% Ca where fruiting crops need soluble calcium and nitrate nitrogen during active growth and early fruit development.
Use KMS 0-0-21.5 Potassium Magnesium Sulfate where crops, lawns, flowers, or fruiting plants need potassium, magnesium, and sulfur support before July stress.
Use testing and probing before making broad fertilizer decisions, especially in beds with years of compost, repeated fertilizer use, or recurring problems.
The best late-June corrections are practical and targeted.
Correct moisture swings. Add or adjust mulch after soil is warm. Deepen watering where roots are active. Improve drainage where roots are staying wet. Stop walking on wet beds. Pull weeds before they steal July water. Prune or trellis dense crops for airflow. Check containers daily. Support fruiting crops before they are overloaded.
Correct calcium timing where fruiting crops need it. Calcium Nitrate fits when soluble calcium and measured nitrate nitrogen support are needed. Apply before future fruit are damaged, not after the crop is already full of symptoms.
Correct potassium and magnesium support where fruiting, heat, and leaf function demand it. KMS fits when plants need potassium, magnesium, and sulfur without more nitrogen.
Correct guessing. Use the Soil Probe And Analysis Kit to understand soil moisture, structure, sampling needs, and root-zone differences before making large adjustments.
July is easier when the garden enters it balanced.
The summer solstice is a reminder that the season is still moving.
The garden is not finished getting established. It is shifting into heavier production and heavier stress. The plants that perform well in July are usually the ones that enter July with active roots, steady water, balanced fertility, enough calcium movement, enough potassium support, and leaves that are still functioning well.
A late-June walk gives growers a chance to correct the small things before they become the big things.
Supply Solutions offers practical tools for this checkpoint. The Soil Probe And Analysis Kit helps growers check the root zone and make fertility decisions with better information instead of guessing from surface symptoms. Calcium Nitrate 15.5-0-0 + 19% Ca fits fruiting crops that need soluble calcium and nitrate nitrogen during flowering, fruit set, and early sizing, especially before calcium-related fruit problems spread. KMS 0-0-21.5 Potassium Magnesium Sulfate fits crops, lawns, flowers, fruit trees, berries, raised beds, and containers that need potassium, magnesium, and sulfur support before July heat peaks. Used with steady irrigation, mulch, crop-stage awareness, and careful observation, these products help farmers, gardeners, landscapers, and small growers move into July with stronger plants and fewer avoidable setbacks. Contact Supply Solutions for help choosing the right solstice correction program for gardens, raised beds, fruiting crops, lawns, containers, berries, or summer landscapes.
The summer solstice is a useful checkpoint in the garden because it arrives when the season starts to change tone. Spring establishment is mostly behind
June is when many fruiting crops begin asking a different question. In spring, the question was often whether the plant could get established. Could the
Give us a call or visit our store, and we’ll help you find the right solution for your business.
© Supply Solutions LLC 2026
